Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the clutch and brake levers on the Harley-Davidson Street Bob Club Style, a very simple and quick operation. Starting with the brake lever, first loosen the fixing nut of the mirror with a 12mm spanner, then detach the clip from the pin on which the lever rotates using the appropriate pliers or an equivalent tool. Once the lever is removed from the handlebar, position the replacement part, reinsert the pin and the corresponding clip. For the clutch, follow the exact same procedure.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Pads on the Harley Davidson Street Bob
Replacing the Rear Brake Pads on the Harley Davidson Street Bob
Street Bob Today, follow the main steps to remove and replace the rear brake pads on the Harley Davidson Street Bob. First, place the bike on its stand and begi…
How to Remove and Replace the Front Wheel of the Harley Davidson Street Bob
How to Remove and Replace the Front Wheel of the Harley Davidson Street Bob
Street Bob Follow these instructions to remove and replace the front wheel of the Harley Davidson Street Bob motorcycle. First, place the motorcycle on a stand …
How to replace the brake lever on a Harley Davidson Street Bob?
How to replace the brake lever on a Harley Davidson Street Bob?
Street Bob To replace the brake lever on a Harley Davidson Street Bob, loosen the screw that secures the lever to its mechanism, located at the top. Once this s…

How to Replace the Engine Oil in the KTM Duke 390?

As you can see in this tutorial, replacing the engine oil in the KTM Duke 390 is a very simple and quick task. Before proceeding, wait until the engine is completely cold to work safely. Start by placing a container underneath the bike, then locate the drain plug on the lower left side and unscrew it with a socket wrench. Once all the oil contained in the engine has drained out, open the filter housing cap, replace the filter, and reassemble everything. Finally, insert new oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos