Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Holden Trax
    4. : Checks and maintenance

Chevrolet Trax - Checks and maintenance

Chevrolet Trax (2013-2020 / MK 1)
How to perform a service reset on a Holden Trax.
Thanks to today's very short video tutorial, we can see how to reset the service light on our Holden Trax (2013-2020). The operation is very simple to do and …read all…
Posted on 28 January 2024 by ScegliAuto
Chevrolet Trax (2013-2020 / MK 1)
Reset the Holden Trax service light
Today we will see, in this video tutorial, the instructions necessary to reset the Holden Trax oil change routine maintenance light. First we get in the car …read all…
Posted on 24 April 2024 by ScegliAuto
Airbags (1) Shock absorbers (1) Coil (1) Bodywork (1) -board computer (1) Checks and maintenance (2) Light bulb (1) Handle (1) Engine oil (1) Door panel (1) Instrument cluster (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos