Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Holden Trax
    4. : Instrument cluster

Chevrolet Trax - Instrument cluster

Chevrolet Trax (2013-2020 / MK 1)
How to reset the service on the Holden Trax
If we have carried out the replacement of the engine oil and filter on this model of car in do-it-yourself mode, we must then reset the service warning light …read all…
Posted on 5 August 2022 by ScegliAuto
Airbags (1) Shock absorbers (1) Coil (1) Bodywork (1) -board computer (1) Checks and maintenance (2) Light bulb (1) Handle (1) Engine oil (1) Door panel (1) Instrument cluster (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos