Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Insight
    4. : Checks and maintenance

Honda Insight - Checks and maintenance

Honda Insight (2009-2014 / ZE2, ZE3)
How to reset the service light on the Honda Insight
To reset the service light on the Honda Insight, we need to turn on the vehicle without starting the engine, as light resets should always be done with the …read all…
Posted on 5 May 2024 by ScegliAuto
Honda Insight (2019-2024 / ZE4)
Resetting the tire pressure on a Honda Insight.
Today you will learn how to reset the tire pressure warning light on a 2019 Honda Insight. The tire pressure warning light illuminates when there is incorrect …read all…
Posted on 7 February 2024 by ScegliAuto
Honda Insight (2019-2024 / ZE4)
How to open the fuel door that is locked in the Honda Insight?
In the Honda Insight, it is possible for the fuel door to become stuck, for example due to a problem with the control button or the lock actuator. In these …read all…
Posted on 3 February 2024 by ScegliAuto
Honda Insight (2009-2014 / ZE2, ZE3)
Resetting the service of a Honda Insight.
Let's watch in this short video tutorial all the steps to follow to reset the service light, the light related to the remaining life of the engine oil, on a …read all…
Posted on 17 April 2023 by ScegliAuto
Spark plugs (1) Checks and maintenance (4) Headlight (1) Air filter (2) Accessory Kit (2) Light bulb (1) Headlight bulb (1) Engine oil (1) Tires (1) Fuse box (1) Outside rearview mirror (1) Interior rearview mirror (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos