Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse layout of the Honda Element?

Model: Honda Honda Various
Part: Fuse box

In this video we can see where the fuse boxes of the Honda Element are located and what their respective diagrams are, useful in case we need to check the fuses of a malfunctioning device. We find the first box inside the cabin, precisely in the lower left area of the dashboard on the driver's side. The second box is instead located inside the engine compartment, protected by the black plastic cover next to the battery. In case of blown fuses, make sure to use replacements with equivalent specifications and always operate with the vehicle turned off.

Posted on 12 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the float in the Honda Element?
How to replace the float in the Honda Element?
Honda Honda Various In this tutorial we can see how to disassemble the fuel pump in the Honda Element in order to replace the float, which is in fact connected directly …
How to replace the bulbs in the central console of the Honda Element?
How to replace the bulbs in the central console of the Honda Element?
Honda Honda Various In this tutorial, we can see how to replace the bulbs of the central console in the Honda Element, a very simple and quick operation. First of all, m…
How to reset the maintenance light on the Honda Element.
How to reset the maintenance light on the Honda Element.
Honda Honda Various In the following guide dedicated to all Honda Element owners, we will describe step by step all the necessary steps to complete the manual reset of t…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos