Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check and Change the Fuses on the Honda SH 150

Model: Honda Honda Various
Part: Fuse box

Check how to inspect and potentially replace the fuses on a Honda SH 150. First, open the glove compartment. At the bottom of the compartment, you will find a black box; pry it open from the right side. Inside, there are red fuses rated at 10A, while the blue fuses are rated at 15A. To remove a fuse, you will need the fuse puller located in the tool kit. Securely grip the fuse you want to check or replace and pull it out by leveraging up and down. To determine if it needs replacing, observe the bridge inside the fuse. If the bridge is intact, the fuse does not need changing; if the bridge is broken, it must be replaced. Insert the new fuse in the same location, ensuring it has the same amperage. To refit the new fuse, simply push it in gently, ensuring it is seated correctly. At this point, you can close the box and the glove compartment.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Honda PCX 150
How to Reset the Oil Light on a Honda PCX 150
Honda Honda Various In this video tutorial, see how to reset the oil light on a Honda PCX 150 by following a few simple steps for independent vehicle management. First, …
What is the Fuse Diagram for a Honda Element?
What is the Fuse Diagram for a Honda Element?
Honda Honda Various In this video, see where the fuse boxes for the Honda Element are located and their respective diagrams, useful if you need to check the fuses for a …
What is the fuse layout of the Honda Element?
What is the fuse layout of the Honda Element?
Honda Honda Various In this video we can see where the fuse boxes of the Honda Element are located and what their respective diagrams are, useful in case we need to chec…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos