Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to make the armrest for the seat of the 2012 Honda Jazz

Model: Honda Jazz MK 2 - Years 2008-2013

The following video tutorial shows us how simple it is to build an armrest for the driver's seat of the 2012 Honda Jazz. To build the armrest, we will need to create a support using chipboard wood and tubes, covered with foam and rubber to avoid scratching the plastic parts. It is important to take measurements of the lower console where the wooden base will be inserted before proceeding with the assembly. After taking the measurements and building the base using wood, we cover the armrest with eco-leather fabric. We insert the armrest into the console and make sure it does not cause any issues while driving.

Posted on 16 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front seat on a Honda Jazz MK2?
How to remove the front seat on a Honda Jazz MK2?
Honda Jazz (2008-2013 / MK 2) Today, we will see the steps to remove the front seat on the second generation Honda Jazz in this short video. First, open the front door and use a r…
A safety locker under the seat of the Honda Jazz MK2.
A safety locker under the seat of the Honda Jazz MK2.
Honda Jazz (2008-2013 / MK 2) In this video we see a safety locker that not all Honda Jazz owners - even of the MK2 version, therefore not a recently released car - may be aware o…
How to Replace the Cabin Filter of the Honda Jazz 2
How to Replace the Cabin Filter of the Honda Jazz 2
Honda Jazz (2008-2013 / MK 2) If you own a second-generation Honda Jazz (year 2008-2013) and want to learn how to replace the cabin air filter, simply follow these instructions an…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos