Do it yourself
Frequently asked questions about cars and motorcycles

Cause of hesitation in acceleration of the 2012 Honda Civic

Model: Honda Civic MK 9 - Years: 2012, 2013, 2014, 2015
Part: Checks and maintenance

See other generations:
Video tutorial

In this interesting video, it is pointed out what could be the reason for a defect that occurs with a certain frequency on the 2012 Honda Civic, both in the MK8 and MK9 versions: the car, which does not have any warning lights on, shows hesitations during acceleration around 2000/2200 rpm. Despite cleaning the MAF sensor and checking the throttle body, the situation did not improve, and fortunately the youtuber did a check that was able to give an indication to all those who had the same problem, which was a break in the fold of the air intake tube.

In this way, unmeasured air entered the throttle body, causing hesitation during acceleration.


Posted on 22 November 2025 by ScegliAuto


Related tutorials

Honda Civic (2001-2006 / MK 7) Before starting, open the front door of your Ford Fiesta. Begin by prising out and removing the inserts from the door panel. Next, unscrew and remove…
Honda Civic (2012-2015 / MK 9) Locating the fuses inside your Honda Civic (2012-2015) is straightforward and with the following guide, you will find them without any difficulty. Fi…
Honda Civic (2016-2021 / MK 10) Replacing the front headlight bulb on your 2017 Honda Civic takes just a few minutes. By following the steps in this guide, you will have no difficul…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos