Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2009 Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a 2009 Honda CR-V, turn on the instrument panel and press the TRIP A button for a few seconds. Release the button and wait for all the lights on the panel to turn off. Press and hold it again for a few seconds until the maintenance symbol appears on the display.

Release and press the button again until the new mileage for the next service is displayed. At the end of the procedure, restart the instrument panel.

If the reset fails, visit an authorised workshop to check the oil level sensor. In other cases, it may be necessary to check the entire vehicle via the OBD port and reset it using diagnostic software.


Posted on 17 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Honda CR-V 5
Honda CR-V (2017-2022 / MK 5) If the orange service light appears on the dashboard of your Honda CR-V Mk5 (2020-2022) despite having already completed the service, don't worry as …
How to Reset the Service Light on a 2008 Honda CR-V
How to Reset the Service Light on a 2008 Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today, you will learn how to reset the service light on a 2008 Honda CR-V. Start the ignition and press the knob on the odometer; by pressing the kno…
How to Reset the Service Light in a Honda CR-V
How to Reset the Service Light in a Honda CR-V
Honda CR-V (2007-2012 / MK 3) To reset the service light in a third-generation Honda CR-V, turn on the instrument panel without starting the engine and use the onboard computer bu…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos