Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob and Gaiter on a Honda Accord

Model: Honda Accord MK 5 - Years: 1993, 1994, 1995, 1996, 1997, 1998
Part: Shift knob

See other generations:
Video tutorial

How to replace the gear knob and gaiter on a Honda Accord? Follow this guide for disassembly. First, take the gear knob in your hands and turn it to the left until it comes off the gear stick; use a lever to detach the plastic frame of the leather gaiter.

Install the new leather gaiter with the clips over the central tunnel trim, then take the new gear knob and slide it onto the stick present on the central tunnel; tighten the new knob until it is fully secured. Finally, check the correct installation of the knob by moving the stick on the central tunnel.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

Replacing the Gear Knob on Honda Accord
Replacing the Gear Knob on Honda Accord
Honda Accord (2008-2013 / MK 8) Today, you will learn a very simple task that not everyone knows, which is replacing the gear knob on a Honda Accord. First, as shown in the video, d…
How to replace the gear knob on a 2005 Honda Accord
How to replace the gear knob on a 2005 Honda Accord
Honda Accord (2002-2007 / MK 7) The steps to replace the gear knob are simple and quick to perform independently, especially when it comes to a 2005 Honda Accord. To remove the gear…
How to Replace the Gear Shift Knob on Honda Accord Automatic
How to Replace the Gear Shift Knob on Honda Accord Automatic
Honda Accord (2012-2017 / MK 9) Today we will see the step-by-step instructions that will allow us to disassemble and replace the gear shift knob on the Honda Accord automatic. Firs…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos