Do it yourself
Frequently asked questions about cars and motorcycles

Installing Aeroskin on Front Bonnet

Model: Honda CR-V MK 4 - Years 2012-2017
Part: Body

Before proceeding with the installation, thoroughly clean the front of the bonnet, where the aeroskin will be placed, with alcohol and degreaser (anti-silicone can also be useful).
Remove the protective film from the double-sided tape on the back of the aeroskin: peel back a small section, just enough to position the aeroskin and hold it in place while completing the fixing. Once you have accurately centred the position, remove the protective film from the double-sided tape and secure the device by pressing along the edge and the entire length, both of the upper and lower sections.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda CR-V (2002-2007 / MK 2) In this guide, you will find the instructions to remove and detach the front seat on the Honda CR-V. First, open the front door and start unscrewing …
Honda CR-V (2007-2012 / MK 3) After lifting the bonnet, mark the height at which the bonnet supports are bolted. Now, proceed to unscrew the bolts that hold it to the car body, en…
Honda CR-V (2002-2007 / MK 2) The operation described in the following guide takes about 6 minutes and is of easy difficulty. Installing car mats protects the floor of your car fr…

How to open the fuel tank door in the Hyundai I20?

In this tutorial we can see how to open the fuel tank door in the Hyundai I20, a very simple operation similar to the typical procedure of many vehicles. First of all, let's go inside the cabin, it is not necessary to insert the key or unlock all the locks, then we locate and operate the lever located in the lower left area of the cabin, right next to the driver's seat. Once we have done this, we exit the vehicle, open the door completely and unscrew the fuel tank cap. To close the door, simply press it gently until you hear a click.

Watch the video!


by ScegliAuto

More videos