Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Instrument Cluster Lights on Honda CR-V

Model: Honda CR-V MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Instrument panel light

See other generations:
Video tutorial

In this tutorial video, learn how to remove and replace the instrument cluster lights on a Honda CR-V. First, get inside the car and use a screwdriver to unscrew the screws at the top. Then, pull out the plastic covering of the cluster and unscrew the other screws to remove the instrument cluster.

Once done, disconnect all the electrical connectors at the back by pressing on the tabs.

Rotate the bulb holders and pull them out, replacing the bulbs as shown in the video. After that, reassemble everything following the instructions until the end!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Replacing Instrument Cluster Lights on a Honda CR-V
Replacing Instrument Cluster Lights on a Honda CR-V
Honda CR-V (2002-2007 / MK 2) Learn how to remove the instrument cluster from a Honda CR-V. Enter the cabin and identify the plastics to be removed. Remove the cover plastics loca…
How to Reset the Service Light on a Honda CR-V?
How to Reset the Service Light on a Honda CR-V?
Honda CR-V (2012-2017 / MK 4) You can clear the Service light from the instrument cluster of the Honda CR-V by turning on the ignition, turning the key to position two. Once the k…
How to Remove the Instrument Cluster from the Honda CR-V Dashboard
How to Remove the Instrument Cluster from the Honda CR-V Dashboard
Honda CR-V (2002-2007 / MK 2) In this video tutorial, learn how to remove and replace the instrument cluster and its bulbs on the Honda CR-V dashboard. First, get inside the vehic…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos