Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Exhaust System Replacement Instructions

Model: Honda Civic MK 5 - Years: 1992, 1993, 1994, 1995
Part: Exhaust muffler

See other generations:
Video tutorial

Lift the rear of the vehicle with a jack and use axle stands to support it safely during disassembly. Spray penetrating oil on the mounting bolts of the flange connecting the exhaust pipe to the silencer; then undo the bolts, disconnect the rubber mounts of the silencer, and remove it from its seat.

Replace it with a new one, and if you drive on snowy roads treated with salt, it is advisable to opt for a stainless steel exhaust that will last longer, justifying the higher cost of the replacement.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Add an exhaust terminal to the Honda Civic.
Add an exhaust terminal to the Honda Civic.
Honda Civic (2006-2012 / MK 8) The exhaust tip that we add to this Honda Civic not only improves the aesthetics, but also the sound of the car. We can find the piece, for example, …
Replacement of Oil Sump Gasket
Honda Civic (1995-2001 / MK 6) Open the front bonnet and ensure it is securely supported; it is advisable to carry out this repair with the engine cold to avoid unpleasant burns. T…
Changing Engine Oil and Oil Filter
Changing Engine Oil and Oil Filter
Honda Civic (2006-2012 / MK 8) Lift the vehicle with a jack and use axle stands to support it. Then, unscrew the drain plug from the oil sump (located at the rear of the sump, near…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos