Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Front Brake Pads

Model: Honda Accord MK 8 - Years 2008-2013
Part: Brake pads

Lift the vehicle and secure it. Remove the wheel and gently detach the caliper by removing the two retaining bolts with a ratchet spanner. Remove the retaining springs from the shoe cover and, using a ratchet spanner, completely remove the bolts. Remove the shoes and pads. Remove the shoe supports. Tighten the fixing bolts securely. Refit the shoe supports using a torque wrench. Install the new pads and shoes. Reposition the cover springs and tighten the bolts. Reattach the clips to the brake pipe. Ensure that the pads touch the disc.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Accord (2008-2013 / MK 8) In this video tutorial, you can see how to replace the front brake pads on a Honda Accord 8 by following some essential steps: first, purchase new br…
Honda Accord (2008-2013 / MK 8) The brake discs of a car are essential for the safety of every driver. First, lift the car with a jack and remove the wheel, unscrewing the wheel bol…
Honda Accord (1998-2002 / MK 6) In this tutorial, we can see how to adjust the handbrake in the Honda Accord, a very simple and quick operation. First of all, we park the vehicle in…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos