Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wheel Bearings

Model: Honda Accord MK 7 - Years 2002-2007
Part: Bearing

For this operation, you do not need to consult a mechanic. First, remove the wheel. Once this step is done, you will find yourself facing the braking system of your car; the bearing is located right in the centre of the hub. To reach it and replace it, it is necessary to remove the brake disc, having first removed the caliper and bracket. Once the drive nut is unscrewed, you can finally remove the bearing using a press. After this, you can proceed to install the new wheel bearing in your car.

Updated on 9 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to reset the maintenance light on the Honda Accord
How to reset the maintenance light on the Honda Accord
Honda Accord (1998-2002 / MK 6) Manually resetting the service light on your 2001 Honda Accord only takes a few seconds, and by following the following procedure, you will be able t…
How to reset the tire pressure sensor on the 2018 Honda Accord
How to reset the tire pressure sensor on the 2018 Honda Accord
Honda Accord (2008-2013 / MK 8) If the tire pressure indicator of your 2008 Honda Accord continues to light up even though there is no puncture, then you need to proceed with a manu…
Replacing Brake Pads and Discs
Replacing Brake Pads and Discs
Honda Accord (2002-2007 / MK 7) The braking system of the car is a fundamental component for the safety of the driver. The brake discs are very important for both braking power and …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos