Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Chain on a Honda CR-V 2.0 (2006)

Model: Honda CR-V MK 2 - Years 2002-2007
Part: Timing belt

This guide provides the main instructions for removing and replacing the timing chain on the second generation Honda CR-V, 2006 model, with a 2.0 engine. First, lift the vehicle and remove the auxiliary belt; then remove the crankshaft pulley by undoing the central bolt with a socket spanner. Next, remove the upper timing cover to access the timing chain; take the necessary references for replacing the timing chain, following the video until the end to fully understand the steps!

Updated on 22 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Guide to Replacing the Timing Chain on the Honda CR-V 2.2 I-CDTI
Guide to Replacing the Timing Chain on the Honda CR-V 2.2 I-CDTI
Honda CR-V (2002-2007 / MK 2) Today, discover the procedure to remove and replace the timing chain on the Honda CR-V 2.2 I-CDTI. First, open the bonnet of your car and begin by re…
How to Reset the Maintenance Light on the Honda CR-V Mk2
How to Reset the Maintenance Light on the Honda CR-V Mk2
Honda CR-V (2002-2007 / MK 2) This guide shows how to reset the maintenance light on the Honda CR-V Mk2. The reset procedure is straightforward and does not require any diagnostic…
Replacing the Solenoid on Honda CR-V
Replacing the Solenoid on Honda CR-V
Honda CR-V (2002-2007 / MK 2) Replacing the solenoid purge valve on a Honda CR-V? Open the bonnet, lift it, and secure it. You can work by removing the front wheel. Undo the secur…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos