Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Windscreen Washer Fluid on the Honda Accord MK7

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007

See other generations:
Video tutorial

In this video tutorial, learn how to replace the windscreen washer fluid in the reservoir on the Honda Accord seventh generation, from 2002 to 2009, as well as on most vehicles in circulation. First, lift the vehicle and remove the front right wheel arch; then disconnect the hose and pump from the reservoir to drain all the old fluid, as shown in the video.

Next, open the bonnet and top up with the correct new fluid; fill to the maximum level, following the video tutorial to the end!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Honda Accord (1998-2002 / MK 6) Is the windscreen wiper pump not working anymore? Let’s see how to remove the pump from the reservoir of a Honda Accord. Lift the front bonnet and re…
Honda Accord (2002-2007 / MK 7) Before you can start, open the front door of your Honda Accord. Begin by prising out and lifting the window switch panel using a flathead screwdriver…
Honda Accord (2002-2007 / MK 7) After a certain period, the wiper blades become too worn to perform their function correctly. When you notice that the windscreen does not remain per…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos