Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Trims on Car Doors

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Accessory kit

See other generations:
Video tutorial

To correctly position the trims on the car doors, use appropriately shaped sheets of paper. Fix these sheets to the bodywork with masking tape.

Align the bottom edge of the sheet with the contour of the door bodywork. Use the top edge of the sheet as a guide for applying the trim.

Once the shaped sheets are secured along all the doors, proceed to apply the trims: remove the protective films from the adhesive surface and attach them along the side of the car, ensuring to follow the line of the paper guide, which can be removed afterwards.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Installation of Illuminated Sill Strips
Installation of Illuminated Sill Strips
Honda Accord (2008-2013 / MK 8) Installing illuminated sill strips along the inner edge of the door sill will give the vehicle a striking appearance: the operation is very simple an…
How to Remove the Rear Seats from a Honda Accord 9
How to Remove the Rear Seats from a Honda Accord 9
Honda Accord (2012-2017 / MK 9) In this guide, learn how to remove the rear seats from a ninth-generation Honda Accord by following the instructions below. First, open the rear door…
How to programme the remote after replacing the battery of the Honda Accord
How to programme the remote after replacing the battery of the Honda Accord
Honda Accord (2012-2017 / MK 9) This brief guide provides the main instructions for programming the remote after replacing its battery in the Honda Accord. First, get inside the veh…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos