Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Locking Wheel Bolts

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Wheel rim

This video shows you how to install locking wheel bolts on your car. First, remove one bolt from each wheel to allow the installation of one locking bolt per wheel. The locking bolt is a standard bolt that differs from traditional bolts by its unique head, which can only be removed or tightened using the special socket provided with it. Once the traditional bolts are removed, install the socket for the locking bolts and tighten them in place of the standard nuts. This way, you will have added security against wheel theft.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Control Arm on a Honda CR-V
Replacing the Front Control Arm on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) To replace the front control arm on the Honda CR-V, proceed as follows: 1) Lift the vehicle using suitable jacks. 2) Remove the front wheel. 3) Remov…
Installation of Parking Sensors
Installation of Parking Sensors
Honda CR-V (2007-2012 / MK 3) The installation of parking sensors requires the removal of the rear bumper: start by removing the internal covers of the boot to access the bumper f…
Replacing the Stabiliser Bar Support Bush
Replacing the Stabiliser Bar Support Bush
Honda CR-V (1995-2001 / MK 1) The failure of the stabiliser bar support bush is a common fault, especially in SUVs. The replacement is straightforward but it is advisable to lift …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos