Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Wrap the Logo of a Honda Civic

Model: Honda Civic MK 9 - Years: 2012, 2013, 2014, 2015
Part: Manufacturer emblem

See other generations:
Video tutorial

In this video, you will see how to apply the film to wrap the badge of the Honda Civic to change its colour. Carefully clean the entire surface where the film will be applied using dedicated spray and a microfiber cloth.

Cut the film and apply it along the surface; to ensure adhesion, use a heat gun or even a traditional hairdryer. Use a squeegee to perfectly adhere the edges.

Wait for half an hour to allow it to dry. With a craft knife, carefully trim the edges of the logo, taking care not to scratch.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to replace the remote control battery in a Honda Civic?
How to replace the remote control battery in a Honda Civic?
Honda Civic (2006-2012 / MK 8) In this video, you will see how to replace the remote control battery in a Honda Civic. For this simple operation, you will need a small cross-head s…
How to Replace the Remote Battery in a 2016 Honda Civic
How to Replace the Remote Battery in a 2016 Honda Civic
Honda Civic (2016-2021 / MK 10) This article explains the procedure to replace the remote battery in a 2016 Honda Civic. No tools are required for the replacement. First, remove the…
Where is the fuse box of the Honda Civic?
Where is the fuse box of the Honda Civic?
Honda Civic (2012-2015 / MK 9) Locating the fuses inside your Honda Civic (2012-2015) is straightforward and with the following guide, you will find them without any difficulty. Fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos