Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Honda Odyssey

Model: Honda Honda Various
Part: Service warning light

Video tutorial

In this brief video tutorial, learn how to reset the service light on a Honda Odyssey, a task to be performed after each service if done independently. To begin, switch on the vehicle's instrument panel without starting the engine.

Now, press the button located next to the information display on the speedometer until you reach the oil life indicator. At this point, hold the button for ten seconds and release it as soon as the message starts to flash.

Then, press it again for five seconds, and the reset will be complete.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Install Parking Sensors on a Honda Odyssey?
How to Install Parking Sensors on a Honda Odyssey?
Honda Honda Various To install parking sensors on a Honda Odyssey, first remove the rear bumper. Remove the rivets located inside the wheel arch, loosen the screws under…
How to Replace the Climate Control Bulb on a Honda Odyssey
How to Replace the Climate Control Bulb on a Honda Odyssey
Honda Honda Various To replace the climate control bulbs on the Honda Odyssey, open the upper glove compartment located on the passenger side. This will allow you to lev…
How to Reset the Service Light on the Honda SH 150
How to Reset the Service Light on the Honda SH 150
Honda Honda Various After performing the service that includes changing the engine oil and filter on this scooter, you need to reset the oil change warning light that ha…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos