Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Horn on the Honda Accord MK8

Model: Honda Accord MK 8 - Years: 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

Let’s discover the procedure necessary for the disassembly and replacement of the horn on your eighth generation Honda Accord. First, open the bonnet and start by removing the front bumper; to do this, unscrew the screws found at the top and bottom of the bumper, as well as those located on both sides of the front wheel arches, as illustrated in the video.

At this point, unscrew the screw of the horn bracket and disconnect the electrical connector (in this case, there are two horns); then replace them with the new ones!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a Honda Accord Mk8
How to Reset the Maintenance Light on a Honda Accord Mk8
Honda Accord (2008-2013 / MK 8) This guide shows how to reset the maintenance light on a Honda Accord Mk8. To perform the reset, use the controls on the steering wheel. Press the "S…
How to Remove the Trim Grille of the Honda Accord Mk8
How to Remove the Trim Grille of the Honda Accord Mk8
Honda Accord (2008-2013 / MK 8) This guide shows how to replace the front grille of the Honda Accord Mk8. First, open the bonnet and secure it in position. Then, using a lever, remo…
How to Remove the Front Number Plate from a Honda Accord
How to Remove the Front Number Plate from a Honda Accord
Honda Accord (2008-2013 / MK 8) Before you can start, exit the cabin of your Honda Accord and head to the front of the car. Begin by unscrewing and removing the screws that secure t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos