Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Honda CR-V Mk2

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Warning light – error code

See other generations:
Video tutorial

This guide shows how to reset the maintenance light on the Honda CR-V Mk2. The reset procedure is straightforward and does not require any diagnostic tools; simply use the vehicle's ignition key and the trip meter reset button. With the instrument cluster off, press and hold the trip meter reset button.

At this point, turn on the instrument cluster and keep holding the button until the maintenance light disappears. The operation is now complete.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How do you reset the Service light on the Honda CR-V?
How do you reset the Service light on the Honda CR-V?
Honda CR-V (2002-2007 / MK 2) It will be possible to make the Service light completely disappear from the Honda CR-V instrument panel by holding down the button located in the bot…
How to reset the Service light on the Honda CR-V?
How to reset the Service light on the Honda CR-V?
Honda CR-V (2012-2017 / MK 4) To reset the Service light on the Honda CR-V, turn the ignition key to switch on the instrument panel. Once the panel is on, press the button located…
How to reset the service light on Honda CR-V
How to reset the service light on Honda CR-V
Honda CR-V (2017-2022 / MK 5) To reset the service light on the Honda CR-V, get in and turn on the instrument panel without starting the engine. Use the controls on the steering w…

    Frequently Asked Questions

    • Cr V 2012-2017 - What does the PGM-FI error mean on the Honda CR-V? Read answer
    • Cr V 2007-2012 - What does the PGM-FI light on the Honda CR-V mean? Read answer

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos