Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Honda Amaze Mk1

Model: Honda Amaze MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Brake pads

See other generations:
Video tutorial

This guide shows how to replace the front brake pads on a Honda Amaze Mk1. First, remove the tire on the side you are working on and safely lift the vehicle. Next, unscrew the two bolts securing the brake caliper and move it aside.

At this point, you can remove the old pads and, after cleaning the area with a brake cleaner spray, install the new friction elements, lubricating their ends. Push the caliper piston all the way in and reposition the caliper.

Check the brake operation before hitting the road.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Honda Amaze
How to Replace the Key Battery of the Honda Amaze
Honda Amaze (2013-2020 / MK 1) Replacing the key battery of your Honda Amaze (Mk1) brings the key back to life at a very low cost and in just a few seconds. Let's discover the vari…
How to Replace the Rear Shock Absorber on a Honda Amaze?
How to Replace the Rear Shock Absorber on a Honda Amaze?
Honda Amaze (2013-2020 / MK 1) To replace the rear shock absorber on a Honda Amaze, lift the car so that the rear wheel corresponding to the shock absorber to be removed is not in …
How to Replace the Headlight Bulb of the Honda Amaze
How to Replace the Headlight Bulb of the Honda Amaze
Honda Amaze (2018-2025 / MK 2) To replace the headlight bulb of the Honda Amaze, open the hood to access the internal components of the engine bay. Specifically, disconnect the con…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos