Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Car Stereo in a Honda City?

Model: Honda City MK 6, GM9, GM6, GM4, GM8, GM5 - Years 2014-2023
Part: Car stereo

In this tutorial, you will see how to replace the car stereo in a Honda City, a very simple and quick operation. First, to work safely, disconnect the negative terminal of the battery. Once you do this, start by prying off the instrument cluster trim, then remove the panel located between the steering column and the stereo itself, which is also held in place by clips. If necessary, use a plastic trim tool to make the job easier. Finally, pull out the entire module, disconnect all the rear connectors, and install the replacement by following the reverse procedure.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radio in a Honda City?
How to Replace the Radio in a Honda City?
Honda City (2002-2008 / GD8, GD6, GD9, GE1, GE4, GD7) To replace the radio in a Honda City, start by removing the screws located at the bottom near the climate control buttons. Once these screws are remo…
How to set the clock on the Honda City
How to set the clock on the Honda City
Honda City (2008-2021 / GM3, MK 5, GM2) Adjusting the clock on a 2013 Honda City vehicle is a very simple and quick operation, which can be done independently thanks to our short video tuto…
How to Replace the Air Filter on a Honda City
How to Replace the Air Filter on a Honda City
Honda City (2002-2008 / GD8, GD6, GD9, GE1, GE4, GD7) In this video, you will see how to change the air filter on a Honda City. In the Honda City, the air filter box is located next to the battery. Use a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos