Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Reversing Lights with LED Lights on the Honda Accord

Model: Honda Accord MK 10 - Years: 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light bulb

See other generations:
Video tutorial

If you want to customise your vehicle by replacing the reversing lights with an equivalent LED model, follow the instructions below and refer to the video images. First, gather plastic levers and open the tailgate, then unclip the clips of the plastic panel at the back.

The electrical connector for the bulb will be present at the rear of the light unit, which you need to disconnect to remove the bulb. Take the new LED bulb and place it in the socket, then reconnect the connector.

Follow the same procedure to replace the other bulb, and you're done.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Replacement of Front Fog Lights on a Honda Accord
Replacement of Front Fog Lights on a Honda Accord
Honda Accord (2012-2017 / MK 9) Here are the instructions for removing and replacing the bulbs of the front fog lights on the Honda Accord. First, open the vehicle's bonnet and unsc…
How to adjust the headlights on a Honda Accord?
How to adjust the headlights on a Honda Accord?
Honda Accord (2012-2017 / MK 9) In this tutorial, you will see how to adjust the headlights on a Honda Accord, a very simple and quick operation. First, park the vehicle in front of…
Where Are the Fuses of the Honda Accord Located?
Where Are the Fuses of the Honda Accord Located?
Honda Accord (2012-2017 / MK 9) The fuses of the Honda Accord are located inside two fuse boxes within the car: one is in the cabin and the other is in the engine bay. The first is …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos