Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Fog Lights on a Honda Accord

Model: Honda Accord MK 9 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Fog lights

See other generations:
Video tutorial

Here are the instructions for removing and replacing the bulbs of the front fog lights on the Honda Accord. First, open the vehicle's bonnet and unscrew all the fixing screws of the front bumper to detach and remove it; then disconnect the electrical connector of the fog light bulbs, as shown in the video.

At this point, replace the fog lights or the entire unit; install the new bulb onto the bumper and finally refit the bumper onto the bodywork, applying the reverse procedure!


Updated on 8 October 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlights of the Honda Accord
Replacing the Front Headlights of the Honda Accord
Honda Accord (1998-2002 / MK 6) This guide will show you how to remove and replace the front headlights of the Honda Accord by following these simple steps. First, open the bonnet a…
How to Replace the Front Bulbs on the Honda Accord
How to Replace the Front Bulbs on the Honda Accord
Honda Accord (2002-2007 / MK 7) In this video, you will learn how to replace the front headlight bulbs on the seventh generation Honda Accord. Obtain H1 bulbs, available at supermar…
How to adjust the headlights on a Honda Accord?
How to adjust the headlights on a Honda Accord?
Honda Accord (2012-2017 / MK 9) In this tutorial, you will see how to adjust the headlights on a Honda Accord, a very simple and quick operation. First, park the vehicle in front of…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos