Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Air Filter on Honda Pilot

Model: Honda Pilot YF4, YF3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Air filter

See other generations:
Video tutorial

To change the engine air filter on the Honda Pilot, first open the hood. Locate the position of the filter.

Remove the cover. Clean the area where the filter is housed: it will likely have accumulated debris and dust.

Get the new filter and pay attention to the installation direction, so be mindful of the orientation of the arrows. Now you can put the cover and the intake back in place.

Ensure that all clips, including those at the back, are in their proper position; otherwise, the filter will not function. You can close the hood.

Job done.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to Reset the Engine Oil Light on the Honda Pilot
How to Reset the Engine Oil Light on the Honda Pilot
Honda Pilot (2016-2023 / YF6, YF5) Below are the instructions needed to reset the maintenance light for the engine oil change on the Honda Pilot. First, get inside the vehicle and star…
How to Replace the Remote Battery in a Honda Pilot?
How to Replace the Remote Battery in a Honda Pilot?
Honda Pilot (2016-2023 / YF6, YF5) As shown in this tutorial, replacing the remote battery in a Honda Pilot is an extremely simple and quick task. You will need a replacement CR2032 ba…
How to Reset the Engine Oil Change Light on a Honda Pilot
How to Reset the Engine Oil Change Light on a Honda Pilot
Honda Pilot (2016-2023 / YF6, YF5) In just a few minutes, we will see how to reset the maintenance service light for the engine oil change on a Honda Pilot. First, get in the vehicle a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos