Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Crankshaft Pulley in a Honda Civic?

Model: Honda Civic MK 8 - Years 2006-2012
Part: Checks and maintenance

In this tutorial, you will see how to replace the crankshaft pulley in a Honda Civic, a simple task that requires good manual skills. First, lift the front right side with a jack, taking all necessary safety precautions. Then, remove the wheel, grasp the tensioner, and loosen it to release the belt. Next, unscrew the pulley bolt using a 19mm socket, preferably with a powerful impact wrench. Once the replacement is in place, tighten the bolt using a torque wrench set to 48Nm and reattach the belt.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Civic (2006-2012 / MK 8) To change the time on a 2009 Honda Civic, perform the operation with the vehicle stationary and the ignition on. On the radio console, locate the but…
Honda Civic (2006-2012 / MK 8) In this tutorial, you will see how to replace the serpentine belt on the Honda Civic, a very simple and quick operation. First, ensure that the engin…
Honda Civic (2016-2021 / MK 10) In this tutorial we can see how to change the language of the on-board computer in the Honda Civic, an extremely simple and quick operation, to be ca…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos