Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre warning light on the Honda HR-V?

Model: Honda Hr V RU, MK 2 - Years 2016-2022
Part:

In this tutorial, you will learn how to reset the tyre warning light on the Honda HR-V. This operation is very simple and quick, and should only be done once the correct pressure for each tyre has been restored. First, enter the vehicle, then insert the key and turn on the ignition. Next, locate the button with the warning light icon on the left console of the dashboard, and hold it down until the warning light disappears completely. To verify that the operation was successful, restart the vehicle.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tire pressure warning of the Honda HR-V
Resetting the tire pressure warning of the Honda HR-V
Honda Hr V (2016-2022 / RU, MK 2) Today we will learn how to reset the tire pressure warning on the Honda HR-V; before performing the reset and recalibration of the TPMS sensors, it i…
How to reset the tire pressure light on the Honda HR-V
How to reset the tire pressure light on the Honda HR-V
Honda Hr V (2021-2026 / RV4, RV3, RV6, RV5) Today we will learn how to reset the tire pressure warning light (TPMS) on the Honda HR-V; before performing the reset, it is necessary that all four…
How to Reset the Tyre Light on the 2023 Honda HR-V
How to Reset the Tyre Light on the 2023 Honda HR-V
Honda Hr V (2016-2022 / RU, MK 2) In this guide, we will discover how to reset the tyre light on your new 2023 Honda HR-V. The first step is to get inside the vehicle and take your pl…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos