Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Honda Accord

Model: Honda Accord MK 7 - Years 2002-2007
Part: Warning light – error code

This video shows the step-by-step procedure to reset the maintenance light on the Honda Accord. This procedure is very simple and quick to perform. To reset the light, first turn on the ignition by placing the key in position 2. Then, press and hold the reset button located at the bottom right of the instrument cluster. While holding it, turn off and then turn on the ignition again by placing the key in position 2 and continue holding the button for 10 seconds. After these 10 seconds, release the button and restart the ignition to check that the reset has been successful.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2006 Honda Accord
How to reset the oil light on the 2006 Honda Accord
Honda Accord (2002-2007 / MK 7) To manually reset the engine oil light on the instrument panel display of your 2006 Honda Accord, simply follow the guide below and apply all the ste…
How to Reset the Tyre Pressure Warning Light on a Honda Accord
How to Reset the Tyre Pressure Warning Light on a Honda Accord
Honda Accord (2018-2023 / MK 10) To reset the tyre pressure warning light on a Honda Accord, first turn on the ignition. Then, navigate through the menu on the central display: selec…
How to Reset the Service Light on a Honda Accord?
How to Reset the Service Light on a Honda Accord?
Honda Accord (2008-2013 / MK 8) To reset the Service light on a Honda Accord, turn on the ignition by inserting the key into the ignition switch. Once the dashboard is lit, press an…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos