Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Windscreen Wiper Control Panel Replacement

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Body

See other generations:
Video tutorial

After opening the bonnet, remove it for easier access; now remove the bolts that secure the wipers, this way, by making some movements to exploit the play between the hole and the bolt, you can remove the wiper blades and remember their position. Remove the clips that secure the plastic parts around the bonnet to the bodywork.

Gently lift the plastic parts and remove them, being careful of any connectors or tubes for fluids. Retrace the steps in reverse, fitting the clips and everything necessary.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Remove the Windscreen Wiper Motor from a Honda CR-V
How to Remove the Windscreen Wiper Motor from a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Is your windscreen wiper not working anymore? Follow this guide to remove the front wiper motor from a Honda. Pull the plastic lever located at the b…
Replacing the Windscreen Wiper Pump on Honda CR-V
Replacing the Windscreen Wiper Pump on Honda CR-V
Honda CR-V (2007-2012 / MK 3) Is water no longer coming from the wipers? Learn how to remove the pump of the windscreen washer reservoir. Lift the front bonnet and remove the bump…
Replacing the Front Wiper Blades on a Honda CR-V Series 1
Replacing the Front Wiper Blades on a Honda CR-V Series 1
Honda CR-V (1995-2001 / MK 1) The video shows how to replace the front wiper blades on a Honda CR-V first series. This is a simple task that can be done in a few minutes without v…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos