Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the oil light on the 2012 Honda Pilot

Model: Honda Pilot YF4, YF3 - Years 2009-2015
Part: Service Light

To complete the manual reset of the oil light on your 2012 Honda Pilot, it only takes a few seconds. All you have to do is read the following guide and follow the steps described. First, you need to enter the interior of the car and reach the driver's seat. At this point, turn on the ignition and press the "Sel/Reset" button several times located on the right side of the steering wheel. As soon as the screen displays the remaining kilometers until the next service, hold down the same button used before and then select the "Reset" option. Finally, confirm the reset and you're done.


Posted on 9 May 2024 by ScegliAuto



How to reset the oil light on the Honda Pilot.
Honda Pilot (2009-2015 / YF4, YF3) In this new guide of ours, we will discover the various steps to manually reset the oil light on the instrument panel of your Honda Pilot. First of a
How to reset the oil light on the 2007 Honda Pilot.
Honda Pilot (2003-2008 / YF2, YF1) In this new mini guide dedicated to your first-generation Honda Pilot (year 2007), we will discover how to manually reset the oil indicator light. Th
How to reset the Honda Pilot engine oil warning light
Honda Pilot (2016-2023 / YF6, YF5) Below we will see the instructions needed to reset the Honda Pilot's oil change routine maintenance light. First we get in the car and start the engi

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos