Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Honda Pilot

Model: Honda Pilot YF4, YF3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

Resetting the oil light on a Honda Pilot is a procedure to perform immediately after changing the engine oil. The reset allows you to set the next mileage for the oil change. Start the reset procedure by turning on the ignition and pressing the button located to the left of the multifunction display.

Access the mileage section and then turn off the ignition. Turn the ignition back on and hold the button until the display and the light start to flash.

Release the button, then press it again and wait for the procedure to complete.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2015 Honda Pilot
How to Reset the Service Light on a 2015 Honda Pilot
Honda Pilot (2009-2015 / YF4, YF3) Today, you will learn how to reset the oil light on a 2015 Honda Pilot. To reset the light, turn on the ignition and press the button located on the …
How to Reset the Engine Oil Light on the Honda Pilot
How to Reset the Engine Oil Light on the Honda Pilot
Honda Pilot (2016-2023 / YF6, YF5) Below are the instructions needed to reset the maintenance light for the engine oil change on the Honda Pilot. First, get inside the vehicle and star…
How to Reset the Oil Light on the Honda Pilot
How to Reset the Oil Light on the Honda Pilot
Honda Pilot (2009-2015 / YF4, YF3) In this guide, you will learn the steps to manually reset the oil light on the instrument panel of your Honda Pilot. First, get in the driver's seat …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos