Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the external rearview mirror of the Honda Insight

Model: Honda Insight ZE4 - Years 2019-2026
Part: Side mirror

Today's step-by-step instructions will show us how to disassemble and replace the external rearview mirror of the Honda Insight. First, we open the front door and begin to disassemble and remove the plastic cover behind the rearview mirror; then we disconnect the electrical connector for the glass adjustment and unscrew the mirror fixing screws, as shown in the video. At this point, we remove the mirror from the outside, along with the wiring; we then install the new mirror, finally adjusting the mirror glass!

Posted on 26 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external rearview mirror of the Honda Insight
How to replace the external rearview mirror of the Honda Insight
Honda Insight (2009-2014 / ZE3, ZE2) Below we will discover the steps that will show us how to disassemble and replace the external rearview mirror of the Honda Insight. First, open the …
How to adjust the cover of the external rearview mirror on Honda Insight
How to adjust the cover of the external rearview mirror on Honda Insight
Honda Insight (2009-2014 / ZE3, ZE2) To adjust the cover of the rearview mirror of a Honda Insight, the general steps are as follows. Open the door of the side mirror you want to adjust.…
How to Replace the Indicator Lights on the Mirrors of the Honda Insight?
How to Replace the Indicator Lights on the Mirrors of the Honda Insight?
Honda Insight (2009-2014 / ZE3, ZE2) In this tutorial, see how to replace the indicator lights on the wing mirrors of the Honda Insight, a very simple and quick operation. First, insert …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos