Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Light on a Honda Jazz

Model: Honda Jazz MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

To reset the oil light related to the engine oil change on a Honda Jazz, do the following: turn on the ignition, press the button located on the instrument panel at the top right. Continue to press the button until the oil light starts to flash and the percentage shows 100%. Then release the button and turn off the ignition.

After a few seconds, turn on the ignition again to check that the light has been successfully reset. If the operation was not successful, you can repeat it.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

Honda Jazz (2013-2019 / MK 3) Today's instructions will show us how to reset the maintenance service light for the engine oil change on the Honda Jazz. First, we get into the car …
Honda Jazz (2019-2026 / MK 4) In this tutorial, we will see how to reset the tyre warning light on a Honda Jazz, a very simple and quick operation, to be done only once the correc…
Honda Jazz (2013-2019 / MK 3) To reset the tyre pressure light on a Honda Jazz, turn on the ignition using the appropriate button, then scroll through the menu that appears on the…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos