Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of a Honda Fit

Model: Honda Fit GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

To replace the battery in the key fob of a fourth-generation Honda Fit, extract the metal emergency key from the top of the remote. After removing the key, insert the rigid part of the key or a small screwdriver into one of the two upper slots to open the remote.

Replace the battery and reassemble the remote. If the key still does not work after the replacement, you need to reset the key. If reprogramming does not yield the desired results, proceed with a computerized diagnostic.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of a Honda Fit
How to Replace the Key Fob Battery of a Honda Fit
Honda Fit (2020-2026 / GR3, GS1, GR9, GR8, GR7, GR6, GR5, GR1, GR4, GR2) When the battery of the key fob for a Honda Fit is running low, the battery icon will flash on the instrument panel. You will need to replace the bat…
How to replace the battery of the Honda Fit key
How to replace the battery of the Honda Fit key
Honda Fit (2013-2019 / GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7) If the key of your Honda Fit no longer works due to a completely exhausted battery, then all you have to do is carefully read the following guide and…
How to Replace the Key Fob Battery of a Honda Fit
How to Replace the Key Fob Battery of a Honda Fit
Honda Fit (2013-2019 / GK3, GK4, GP6, GK6, GP5, GK7, GK5, GH7) To change the battery of the remote for a Honda Fit, you need a small flathead screwdriver to remove the small screw at the bottom of the remote. Thi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos