Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of a Honda Fit

Model: Honda Fit GK6, GK7, GK5, GK4, GH7, GP5, GP6, GK3 - Years 2013-2019
Part: Checks and maintenance

To change the battery of the remote for a Honda Fit, you need a small flathead screwdriver to remove the small screw at the bottom of the remote. This allows you to open the case. Inside the remote, you will find two button batteries of type CR2032, which are easily available for a few dollars at supermarkets or convenience stores. Using the screwdriver, remove the old batteries and replace them with new ones, making sure to install them with the correct polarity. You can then close the cover by tightening the small screw that holds it in place. Operation complete.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of a Honda Fit key
How to replace the battery of a Honda Fit key
Honda Fit (2013-2019 / GK6, GK7, GK5, GK4, GH7, GP5, GP6, GK3) To replace the battery of a fourth generation Honda Fit vehicle key, we need to extract the emergency metal key from the top of the remote. After rem…
What is the fuse diagram for the Honda Fit?
What is the fuse diagram for the Honda Fit?
Honda Fit (2007-2012 / GE) In this video we can see where the fuse boxes of the Honda Fit are located and what are the respective diagrams, to consult in case we need to check …
What is the Fuse Diagram for the Honda Fit?
What is the Fuse Diagram for the Honda Fit?
Honda Fit (2007-2012 / GE) If any devices in your Honda Fit have suddenly stopped working, the first thing to do is check the status of the respective fuses, the diagrams for w…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos