Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Coolant on a Husaberg FE 450

Model: Husaberg Fe 450
Part: Antifreeze coolant

Video tutorial

In this short video tutorial, you will see how to remove the old coolant to replace it with new coolant on a Husaberg FE 450. First, drain the old coolant by removing the hose from the radiator: to do this, remove the clip by unscrewing the screw. At this point, reattach the hose and pour the coolant into the designated hole, filling the reservoir to the level; then start the vehicle and wait for the coolant to circulate before adding, if necessary, the new coolant and always fill to the maximum level!


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Fe 450 To dismantle the engine on the Husaberg FE 450, first loosen the bolts securing the engine block in its housing, then disconnect all connectors and r…
Fe 450 To replace the clutch on the Husaberg FE 450, loosen the screws securing the cover located on the lower centre of the right side of the bike. Once th…
Fe 450 To adjust the valves on the Husaberg FE 450, first loosen all the bolts securing the seat and remove the seat itself. Next, remove the fairing sectio…

How to Adjust the Suspension on a TM Racing 300?

To adjust the suspension on a TM Racing 300, locate the rear shock absorber of the bike: this will be found inside the vehicle, in the area between the rear mudguard and the rear swingarm. Once the shock absorber is located, adjust it by tightening or loosening the bolts found at its lower and upper parts: following the instructions in the manual, you can perform the suspension adjustment and thus adjust the height of the bike according to your riding needs.

Watch the video!


by ScegliAuto

More videos