Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husqvarna
    3. :
  3. Te 300i
    4. : How to replace the wheel bearings on the Husqvarna TE 300i.

Model: Husqvarna Te 300i
Part: Bearing
How to replace the wheel bearings on the Husqvarna TE 300i.

In this guide, we will see instructions on how to disassemble and replace the rear wheel bearings of the Husqvarna TE 300i enduro motorcycle. First, we put our motorcycle on a stand and lift the rear wheel. We unscrew the central pin to remove it, disconnecting the transmission cover, as shown in the video. At this point, we use something thin and pointed to remove the dust cover and then the wheel bearing. We then clean the interior area of any remaining dirt and install the new bearing, following the video tutorial until the end!


Posted on 23 May 2023 by ScegliAuto

How do you disassemble the engine of the Derbi GPR 125?

In order to disassemble the engine of the Derbi GPR 125 you have to loosen all the screws that fix the piece inside its housing, so that it can be extracted. Once the engine has been removed, it will be possible to unscrew the screws that secure the clutch housing, which must be extracted from its housing by unscrewing the fastening screws. When the clutch has been removed, it is possible to unscrew the screws that fix the half crankcase of the engine on the opposite side, removing it and accessing the components inside. In this way it will be possible to remove and replace the internal parts of the engine.

Watch the video!


by ScegliAuto

More videos