Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : Dashboard light

Hyundai Getz - Dashboard light

Hyundai Getz (2002-2011 / MK 1)
How to replace the bulbs of the instrument cluster in the Hyundai Getz?
In this tutorial we can see how to replace the dashboard light bulbs in the Hyundai Getz, a very simple and fast operation. First of all, unscrew the two …read all…
Posted on 14 June 2022 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
How to replace the instrument cluster bulbs on Hyundai Getz
In this video tutorial we will see how to disassemble the instrument cluster and how to replace the bulbs on a Hyundai Getz, in simple and quick steps. First …read all…
Posted on 14 February 2024 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
Dashboard disassembly on Hyundai Getz
Unscrew the two Phillips screws in the upper part of the panel, as shown in the video. Now, with a small screwdriver or with a plastic wedge or with any …read all…
Posted on 16 January 2024 by ScegliAuto
Shock absorbers (4) Antenna (2) Car stereo (3) Bushings (2) Arm (1) Key (1) Timing belt (3) Air conditioning controls (1) Dashboard (2) Drive shaft boot (1) Headlight (1) Air filter (2) Cabin air filter (1) Light bulb (2) Rear light bulb (1) Dashboard light (3) License plate light (2) Engine oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (2) Gear Shift Knob (1) Pump (1) Fuel pump (1) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (5) Seat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos