Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : Light bulb

Hyundai Getz - Light bulb

Hyundai Getz (2002-2011 / MK 1)
How to replace the Hyundai Getz license plate bulb?
In order to replace the Hyundai Getz license plate light bulb, you need to open the boot lid and remove the screws and rivets that secure the inner plastic …read all…
Posted on 10 March 2024 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
How to replace the bulb of the climate controls on the Hyundai Getz?
In order to replace the Hyundai Getz climate control light bulbs, you must remove the cover under the steering column and detach the two side cords that secure …read all…
Posted on 10 March 2024 by ScegliAuto
Shock absorbers (4) Antenna (2) Car stereo (3) Bushings (2) Arm (1) Key (1) Timing belt (3) Air conditioning controls (1) Dashboard (2) Drive shaft boot (1) Headlight (1) Air filter (2) Cabin air filter (1) Light bulb (2) Rear light bulb (1) Dashboard light (3) License plate light (2) Engine oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (2) Gear Shift Knob (1) Pump (1) Fuel pump (1) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (5) Seat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos