Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : Shock absorbers

Hyundai Getz - Shock absorbers

Hyundai Getz (2002-2011 / MK 1)
How do you replace the rear shock absorber of the Hyundai Getz?
In order to replace the rear shock absorber of the Hyundai Getz, you need to lift the car using a jack or a lift, so that the corresponding wheel is not in …read all…
Posted on 21 July 2023 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
Replacement rear shock absorbers of a Hyundai Getz
Do we want to replace the shock absorbers of a Hyundai Getz? We lift the car with a jack and remove the rear wheel to access the wheel hub. Unscrew the locking …read all…
Posted on 10 February 2024 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
Disassembly of a shock absorber support of a Hyundai Getz
Let's see in this video how to intervene on the disassembly of a shock absorber support of a Hyundai Getz. We place our car on a column bridge, loosen the pins …read all…
Posted on 10 October 2023 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
How to replace the car shock absorber
Shock absorbers are among the components of the automobile that are most subject to stress. They usually need to be replaced between 70,000 and 80,000 km. You …read all…
Posted on 11 September 2023 by ScegliAuto
Shock absorbers (4) Antenna (2) Car stereo (3) Bushings (2) Arm (1) Key (1) Timing belt (3) Air conditioning controls (1) Dashboard (2) Drive shaft boot (1) Headlight (1) Air filter (2) Cabin air filter (1) Light bulb (2) Rear light bulb (1) Dashboard light (3) License plate light (2) Engine oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (2) Gear Shift Knob (1) Pump (1) Fuel pump (1) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (5) Seat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos