Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : Air filter

Hyundai Getz - Air filter

Hyundai Getz (2002-2011 / MK 1)
How to replace the air filter in Hyundai Getz?
In this tutorial we can see how to replace the air filter in the Hyundai Getz, a very simple and fast operation. To do this, in addition to the right …read all…
Posted on 10 November 2022 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
How to replace Hyundai Getz air filter
Let's see how to remove and replace the engine air filter present on Hyundai Getz: open the car door, pull up the engine compartment opening lever located at …read all…
Posted on 6 November 2023 by ScegliAuto
Shock absorbers (4) Antenna (2) Car stereo (3) Bushings (2) Arm (1) Key (1) Timing belt (3) Air conditioning controls (1) Dashboard (2) Drive shaft boot (1) Headlight (1) Air filter (2) Cabin air filter (1) Light bulb (2) Rear light bulb (1) Dashboard light (3) License plate light (2) Engine oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (2) Gear Shift Knob (1) Pump (1) Fuel pump (1) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (5) Seat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos