Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Air Filter in a Hyundai Getz?

Model: Hyundai Getz MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Air filter

Video tutorial

In this tutorial, you will learn how to replace the air filter in a Hyundai Getz, a very simple and quick operation. To do this, in addition to the correct replacement part, you will need a 10mm socket spanner.

First, ensure the engine is cold, then open the bonnet, unscrew the single fixing bolt of the filter box, and open it by unlocking the clip on the opposite side. Next, remove the old filter, clean the inside of the airbox thoroughly from any debris, and fit the new part by simply following the reverse procedure.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

Hyundai Getz (2002-2011 / MK 1) Follow these steps to remove and replace the engine air filter on a Hyundai Getz: open the car's door, pull up the engine compartment release lever l…
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …
Hyundai Getz (2002-2011 / MK 1) Want to remove the rear bumper from your Hyundai Getz? Here's how to do it. Using a screwdriver or battery-powered drill, unscrew the fastening screw…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos