Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : How to replace Hyundai Getz air filter

Hyundai Getz - Video tutorial

Model: Hyundai Getz MK 1 - Years 2002-2011
Part: Air filter
Operation: How to replace Hyundai Getz air filter

Let's see how to remove and replace the engine air filter present on Hyundai Getz: open the car door, pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same with the auction. Remove the engine soundproofing panel (if necessary), then open the air kit (unscrew the tightening screws), uncover the filter box cap and extract the worn filter. We insert a new filter in the dedicated housing (making it adhere well around the walls). Finally we reassemble the cap of the air box and tighten the screws. We close the front hood after maintenance.


Posted on 6 November 2023 by ScegliAuto



How to replace the air filter in Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) In this tutorial we can see how to replace the air filter in the Hyundai Getz, a very simple and fast operation. To do this, in addition to the right
Where is the OBD2 port located on the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) If you want to locate the OBD2 port in your Hyundai Getz on your own, all you have to do is follow these simple steps. First, reach the driver's seat
How do you remove the air conditioning controls on the Hyundai Getz?
Hyundai Getz (2002-2011 / MK 1) In order to remove the Hyundai Getz air conditioning controls, you have to open the glove box on the front passenger side, so that the molding that s

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos