Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : Timing belt

Hyundai Getz - Timing belt

Hyundai Getz (2002-2011 / MK 1)
How do you replace the timing belt of the Hyundai Getz?
In order to replace the timing belt of the Hyundai Getz, you need to loosen the bolts that secure the right front wheel, so that it can be removed along with …read all…
Posted on 19 May 2023 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
How to replace the timing belt in the Hyundai Getz 1.1 Petrol
In this video tutorial we will see the instructions on how to remove and replace the timing belt of a Hyundai Getz 1100 Petrol. To access the belt we must …read all…
Posted on 14 February 2024 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
How to disassemble and the timing belt on a Hyundai Getz
Let's see how to remove and replace the timing belt on a Hyundai Getz. We lift the car on a column bridge, we remove the front wheel with a screwdriver the …read all…
Posted on 2 November 2023 by ScegliAuto
Shock absorbers (4) Antenna (2) Car stereo (3) Bushings (2) Arm (1) Key (1) Timing belt (3) Air conditioning controls (1) Dashboard (2) Drive shaft boot (1) Headlight (1) Air filter (2) Cabin air filter (1) Light bulb (2) Rear light bulb (1) Dashboard light (3) License plate light (2) Engine oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (2) Gear Shift Knob (1) Pump (1) Fuel pump (1) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (5) Seat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos