Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Getz
  6. : Fuel pump

Hyundai Getz - Fuel pump

Hyundai Getz (2002-2011 / MK 1)
Where is the fuel pump fuse located in the Hyundai Getz?

If the fuel pump of our Hyundai Getz has suddenly stopped working, the first thing we can do is check the status of the respective fuse, whose location is …read all…
Posted on 24 February 2024 by ScegliAuto

Shock absorbers (4) Antenna (2) Car stereo (3) Bushings (2) Arm (1) Key (1) Timing belt (3) Air conditioning controls (1) Dashboard (2) Drive shaft boot (1) Headlight (1) Air filter (2) Cabin air filter (1) Light bulb (2) Rear light bulb (1) Dashboard light (3) License plate light (2) Engine oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (2) Gear Shift Knob (1) Pump (1) Fuel pump (1) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (5) Seat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos