Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : Instrument cluster

Hyundai Getz - Instrument cluster

Hyundai Getz (2002-2011 / MK 1)
How to change the time on the Hyundai Getz.
If the mini display on the instrument panel of your Hyundai Getz (year 2002-2011) shows a different time from the correct one and you want to manually change …read all…
Posted on 3 September 2023 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
How to replace instrument cluster lights on Hyundai Getz Mk1
This guide shows how to replace the Hyundai Getz Mk1 instrument cluster bulbs. The first operation to perform is to lower the steering wheel to have more work …read all…
Posted on 24 May 2023 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
Disassembly of the instrument cluster on Hyundai Getz
In this video guide we will see the steps on how to disassemble the instrument cluster on a Hyundai Getz, following the instructions below. First we get inside …read all…
Posted on 14 February 2024 by ScegliAuto
Shock absorbers (4) Antenna (2) Car stereo (3) Bushings (2) Arm (1) Key (1) Timing belt (3) Air conditioning controls (1) Dashboard (2) Drive shaft boot (1) Headlight (1) Air filter (2) Cabin air filter (1) Light bulb (2) Rear light bulb (1) Dashboard light (3) License plate light (2) Engine oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (2) Gear Shift Knob (1) Pump (1) Fuel pump (1) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (5) Seat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos