Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Getz
    4. : Door panel

Hyundai Getz - Door panel

Hyundai Getz (2002-2011 / MK 1)
How to disassemble the door panel in the Hyundai Getz?
As we can see in this tutorial, removing the door panel in the Hyundai Getz is a very simple and quick operation. First, let's go inside the cabin, then, using …read all…
Posted on 9 October 2023 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
How to remove the tailgate panel in the Hyundai Getz?
As we can see in this tutorial, removing the rear hatch panel of the Hyundai Getz is an extremely simple and fast operation. We start by opening the hatch …read all…
Posted on 13 September 2022 by ScegliAuto
Hyundai Getz (2002-2011 / MK 1)
How to remove the door panel from Hyundai Getz
Let's find out in this guide the instructions that will allow us to remove and replace the front door panel of the Hyundai Getz. First of all we open the front …read all…
Posted on 16 May 2024 by ScegliAuto
Shock absorbers (4) Antenna (2) Car stereo (3) Bushings (2) Arm (1) Key (1) Timing belt (3) Air conditioning controls (1) Dashboard (2) Drive shaft boot (1) Headlight (1) Air filter (2) Cabin air filter (1) Light bulb (2) Rear light bulb (1) Dashboard light (3) License plate light (2) Engine oil (1) Door panel (3) Front bumper (1) Rear bumper (1) Brake pads (2) Gear Shift Knob (1) Pump (1) Fuel pump (1) Instrument cluster (3) Passenger compartment heating radiator (1) Fuse box (5) Seat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos